Innovation and Manufacturing require constant Supervision

Manufacturing is part of a process of production that is highly important. If the manufacturing process is not managed in a cost effective way it becomes very difficult to relate to cost reduction in manufacturing of commodities. It is in this regard that shopfloor series books has launched a wonderful series that is helpful in providing the correct knowledge of how to improve the Manufacturing skills and manage the sector of the organization to reduce the wastage of the production costs and utilize the resources on the production unit to the best. This way the capacity of production increases and the production costs decrease, raising the levels of profitability.

Innovative and instructional features described in the series help to increase the managerial skills of the production house.

The main objective of the popular series is to teach the organizations to set standards of work by implementing the most powerful and proven improvement tools. This means to pull production techniques in the hands of your entire workforce. An important phase but a workable application!

Focused Equipment Improvement for TPM Teams is another part of the popular shopfloor series books which has the perfect TPM training in this book. This book helps to update the knowledge and work ability of the Production team and it helps them to improve the performances of inspection and restoration. It shows you how to ask the team about the reasons and logical causes of the break downs and future remedies to be taken, how to analyze the equipment condition and improve the operating environment. There is persistent requirement of the inspection of the machinery parts and the replaceable parts of the equipment implying constant supervision and detect free changeover.

Minor Stoppages are the core reasons for bigger problems in the machinery in the near future. Overlooking these minor failures can be very expensive. Proper strategies are required to overcome this hurdle and it is presented in the simplest way in the shopfloor series books!

Source : http://onlinebookstoreinindia.wordpress.com/2014/05/15/innovation-and-manufacturing-require-constant-supervision/

Shop Floor Series Books- a must read for productive workers

Also known as machine shop, Shop floor is an area where a number of workers are engaged in the production of goods and services in a particular area. It is mainly the commercial part of the factory where the production takes place. It has different meanings to different industries. In a retail store, it denotes the place where products and services are sold to the customers. On the other hand, it means the space which it provides to the management of the business.

Books always add the extra knowledge which a professional needs in order to clarify the doubts related to a particular subject. They may be long enough to read, but the knowledge which is gained from them remains useful throughout the professional life. Shopfloor series books are therefore read by many professionals.

There is a strong interrelation between shop floor and production systems. One is incomplete without the other. A firm cannot achieve sufficient production if there is no co ordination among the workers in the shop floor. They teach the employees of an organization on how to co-ordinate with each other. Many companies in the world adopt different shop floor techniques in order to achieve more efficiency in the manufacturing of goods.

AIAG Books are mainly released by the automotive industry group where all books are written keeping in mind about the different kinds of standards such as ISO 9001 which are applied in all the automotive supply chain. There are four areas where one can improve oneself by reading shop floor books; they are business transformation, user experience, technology and governance. In case of business transformation, it aims to implement functions which increase inventory and production. On the other hand, it also increases the user experience by improving the productivity of an employee.

Standards Media was established in 1992 with the objective of selling books to the people and makes it easily available to them online. It also sells books on various other subjects such as Bench marking, Six Sigma and SPC.

Source : http://buybooksonline.edublogs.org/2014/04/17/shop-floor-series-books-a-must-read-for-productive-worker/

Why Professionals Need To Read Books

A book is of immense beneficial to a professional. The problems and the hurdles encountered by him at the work place can best be solved by a book related to his field of work. By consulting a book, he can rectify his errors and commit zero mistakes in the future. Many people, who work around the world, often are given training before they actually begin work. Books in the form of training modules are given to them with the help of which they can train themselves and get habituated with the work. As far as reading professional books are concerned it is always better to read BIS Books.

Mistake-Proofing for Operators : the ZQC System is an excellent book for those workers who want to reduce their flaws at the time of production in factory. The book is a guide to all the people who are looking to find ways in order to bring more efficiency in them. There are various interesting chapters in the book which consists of the principles, strategies, techniques as well as the methodologies that are to be applied by workers.

In the life of a professional it is extremely necessary that there he should commit less errors and it is only by reading such books which an individual can improve their skill.

In order to buy standards online in India, you can refer to the website of Standards Media. It is currently one of the leading publishers in New Delhi. You can get books of different subjects here that are written by some of the most well known authors. Since the year 1992, the company has been offering books to people in India and all over the world. Some of the most well known suppliers of the company include PennWell Publishing Company from USA and the Taylor & Francis Group from UK.

Source : http://dinstandards.wordpress.com/2014/03/26/why-professionals-need-to-read-books/

Engineering books provide you a good knowledge of the subject

There are endless benefits of Engineering. Whatever you look at today is the result of engineering. Supersonic jets, fast cars or bridges each one of them is the outcome of expert engineering. It is a beautiful subject which makes the proper use of physics and mathematics. Learning the subject might be easy but to implement it in a proper way needs foresightedness and a deep logical thinking.

Stephen Hawkins is a live example of how to make the proper use of engineering and discovered how black holes emit radiation with the help of quantum theory. Even at his time it were the engineering books which made a significant change I his mind and he was able to discover something wonderful.  With the advent of technology today, one can buy Engineering Books Online. There is absolutely no need to visit any bookstore; one can rather purchase them online from the plethora of bookstores which has come up today.

There are many branches of engineering such as civil, mechanical, electrical and chemical. All of them have some speciality in them and can give immense knowledge to all the persons who are reading the book. All these subjects have some fantastic principles which we can apply in daily life. Not only this, we can also understand the mechanism of the working of certain parts of either a machine or a vehicle by studying these subjects.

Purchase SAP Press Books from Standards Media and read some of the best books. This is one of the best online book stores where you can get all types of books on different subjects. If you are searching the book Pull Production for the Shopfloor, then you can get them here. You can use different type of payment modes for purchasing the books such as internet banking or can also make the payment through debit cards.

Source : http://storify.com/buybooksonline/engineering-books-provide-you-a-good-knowledge-of

Industrial Management- an essential subject to read

If there is one thing which is going to last till the end of this earth, then it is a book. A person can say no to every possible thing on this earth, but saying no to books is saying no to knowledge. Books do not ask anything in return, they constantly bless an individual with loads of knowledge. The more a person reads, the more knowledge he or she gains.

Industrial Management plays an important role in every economy. It is quite necessary for the current generation to have a good knowledge of this subject. The rapid pace at which industries are growing around the world are increasingly making use of the basic principles of industrial management to get their target achieved. This subject has proved to be beneficial to the senior managers in any industry. In India, industrial management has proved to be very effective for many industries.

You can today buy Industrial Management Books in India written by some of the most eminent authors. These books contain some basic principles which are to be applied in an organization. Industrial waste management is one of the important chapters in such books which teach an individual on how to make the proper use of the resources in an industry without wasting. Moreover, it also teaches the individual as to how one can reduce the negative effects of the industrial wastes on the environment.

Standards Media is a well established name in the publishing industry. It has got some of the best books with itself. One of its most popular books is the Standard Work for the Shopfloor. This book teaches the industry workers some basic principles which they need to apply in their work places in order to achieve the maximum production. You can also get here AIAG Books. AIAG is a standard to determine the quality of the books and ensures that they have been written by keeping in mind certain rules and regulations.

Source : http://onlinebookstoreinindia.webs.com/apps/blog/show/41903730-industrial-management-an-essential-subject-to-read

Importance of engineering books in the life of a person

Electrical engineers are one of the most talented people on this earth. They have the ability to create magic with the help of electricity. They can invent any useful device which is of beneficial to the mankind. By making the sheer use of a subject like electrical engineering, it is possible to create new innovations and developments which are beneficial for mankind. All the renowned scientists of the world have at some point in their life, read electrical engineering books.

What an electrical engineering book can provide to an engineering student, no other source of knowledge can provide that. Today, due to the development of media and technology, you can Buy Engineering Books Online from different types of online book stores. Such books are easy to read and can be understood very easily. The Industrial Control Handbook serves as a great help to all those people who are working as a system engineer or a similar designation in any company. Such books contain some really helpful solutions to the problems encountered by them while they are working in an industry.

The book is not only helpful for the persons who are professionals but also for students who are about to appear for their joint entrance or give higher secondary exams. Engineering books thus enlightens the future of a person who is looking to educate himself or herself with the basics of the subject. Just as they have helped persons gain an in depth knowledge on the subject, in the same way; they will continue to provide knowledge in the future too.

At Standards Media, you can get a number of books written by eminent authors from various fields. You can get here the book Just-in-Time for Operators. The book primarily deals with topics related to production department of a manufacturing concern. You can also get here SAP Press Books here.

Source : http://buybooksonline2.wordpress.com/2014/03/07/importance-of-engineering-books-in-the-life-of-a-person/

Why Shop Floor Series Books Are Always Beneficial to Read

With the increasing number of new subjects in the field of education, the global demand of the books is going to increase in the future. They are an ultimate source of knowledge for an individual and quench the thirst for knowledge. Without books it nearly would have been impossible to get the knowledge of a particular subject and there would have been no difference between human and the animals.

Books can be of different subjects and is one of the best ways to gain knowledge about an unknown subject. If we take the example of the different shopfloor series books that are available in the market. Such books are necessary to read if you want to know about the basics of the subject. The book is mainly written for all the employees who work in the factory mainly in the manufacturing department.

One of the most interesting books is the Focused Equipment Improvement for TPM Teams. This book is of immense help for those people who want to improve their efficiency in the factory. The primary purpose of the book is to enable an individual to learn some basic principles of lubrication, get associated with new techniques of fastening in order to increase the acceleration of the machine and many more. This is the best book to get training on Total Productivity Maintenance.

Some of the interesting chapters in the book include dealing with speed loss, minor stoppages and using equipment to build in quality. The primary purpose of these chapters is to educate the workers and make them learn the simple techniques that are to be applied in the factory to achieve the target output within the desired time.

Standards Media is a publishing house located at Daryaganj in New Delhi. All the books that you will find here contain the BIS catalogue. You can also purchase books online here and get them delivered within few days.

Source : https://sites.google.com/site/buybooksonlineinindia/shop-floor-series-books/why-shop-floor-series-books-are-always-beneficial-to-read

Reading Science and Technological books are beneficial for people

Physics has transformed the way human beings live their life. In the primitive ages, early man used to strike two stones to ignite fire, make the use of sharp tree branches to kill animals, but today the mechanics used in physics has transformed each and every task. The principles of motion, kinetic energy has made life easier and we no longer have to be dependent on those things. We can easily do our household chores or any type of task swiftly.

Science and Technology Books are responsible for bringing such a makeshift in the minds of people. It is with the help of that knowledge present inside those books that mankind has today been successfully able to make vehicles that makes them easier to travel as well as prepare things in the form of instruments which helps to bring ease in working. It is by studying those books that scientist like Isaac Newton was able to discover the principle of earth’s gravity.

Just as Physics has made our life easier, in the same way chemistry is also used in each stage of our life. Whether it is about the onions that make you cry, the ice that floats on water, the soap that cleans your hand or the laundry detergent which you use every day in your dishwasher; each one of the activity is backed by some chemical reactions of chemistry. A handbook of chemistry and physics answers all your questions related to both the subjects. It is an absolute way to have access to all the unknown facts about science.

Standards Media is an online book store, where you can get books that are written according to DIN standards. Such standards are mainly issued by Deutsches Institute for Normung. Using such standards is an assurance to the fact that the book is written keeping in mind about the specific standards that are to be kept in a book.

Source : http://buybooksonline2.wordpress.com/2014/02/19/reading-science-and-technological-books-are-beneficial-for-people/

Three benefits of reading petroleum books

The Petroleum Industry has undergone an immense change since its inception. More and more research now is throwing light on the undiscovered areas. The discovery of petroleum can be traced back to the 20^th century at the time of its invention. The internal combustion engine was a major invention in the development of petroleum.

Petroleum Books have proved to be beneficial for those persons who study the subject and want to make it as a profession. An automotive engineer, for instance needs to have a perfect knowledge about the properties of petroleum. Depending upon the properties of the oil he can decide about the quality of material that should be used in the engine of the car so that it does not affect it in any way.

The benefit of such books is not only confined to its usage in a vehicle, but they also help a person to know about the presence of various compounds and molecules that are present in petroleum that make such a useful substance to the human being. Scientists find such books more helpful they explain the various principles and the complex chemical reactions.

Hence, if we were to sum up the different benefits in points, then following would have been the ones

They help to understand the various physical properties present in petrol such as hydrocarbon compounds, gasoline as well as heavy solids.  One of the main constituent of petrol is crude oil. The viscosity of such oil is responsible for the change in the thickness. A petroleum book explains all types of crude oil.

The property of petrol also varies according to the gravity. For instance: heavier crude oil is generally more mobile and helps to run a vehicle easily.

The books mention the various boiling as well as freezing temperatures of the petrol. Hence, one can determine the extreme temperatures at which petrol can be poured in an engine.

Purchasing petroleum books of ASME standards are a guarantee to the fact that all of them follow the general editorial guidelines. These standards are mandatory to obtain for any kind of scientific books. Currently, there are more than 100 nations around the world that uses such standards. At Standards Media, you can get SPC Books written by Frank, Levinson and William A.

Source : http://buybooksonline.edublogs.org/2014/02/15/three-benefits-of-reading-petroleum-books/

Management and Welding books are full of knowledge sources

Management is gaining its stature in the corporate world day by day. It is the dearth of quality managers, which has given rise to it. Business schools, all across the world are stressing the importance of management to all its students by making them understand its value in social as well as corporate life. Management Books has a pivotal role to play and are of dire necessity for all the future managers of the world.

The word ‘Management’ covers a large area. Since, it is necessary in every field, there are separate books for various subjects such as human resource, financial, media and production. Each one of them is different from each other as the field of study is also different. While the study of management is mainly concerned about inculcating entrepreneurship qualities in an individual, but the study of management books also help to nurture leadership qualities in a person. It teaches him or her all those tricks and tactics that are required to be a leader and to bring out the maximum productivity from an individual.

Just as management books teach an individual about the various management tactics to the applied; in the same way, welding books describe the complex processes that are related to welding. Glass and plastic welding are one of the most of the common uses of welding. Neon Signs and flash tubes are one of the most common uses of welding. Plastic welding on the other hand, finds its usage in making thermosets. The plastic is heated at a certain temperature and they are used in making products like pipes, hand tools and different type of welding machines.

Books from Standards Media are read by both students as well as professionals. Here, you can books of various standards also. This publishing house has also got some of the bestselling books of authors in its kitty. You can also get here OEE for Operators : Overall Equipment Effectiveness and Lean Books.

Source : https://sites.google.com/site/buybooksonlineinindia/management-and-welding-books-are-full-of-knowledge-sources

How Shop Floor Series Books can help you to improve your work productivity

The word Shop Floor has two meanings. It is referred to as a place in a factory where all the workers work on the machine and manufacture products. On the other hand, it can also be called as a place in the retail market where goods are sold to the customers. In both its meanings, there is one thing common and that is goods. For companies it is quite important that they manufacture good quality goods and is able to sell them in order to maintain the profit margin as well as achieve the maximum sales revenue.

There are a variety of shopfloor series books that are written by authors in order to motivate the employees extract the maximum output from them. Such books contain techniques that help all the workers present in the shopfloor area either at the factory or at the retail location.

These books are released in various standards but it is always good to purchasing the BIS Books is one of the best options. Such books are written in accordance to the Bureau of Indian Standards and comply with all the writing rules and regulations. Such books consist of some important features. We will discuss a few of them here:

Hours and Quantities Tracking is the first one of them. It includes some of the important things such as analyzing the report of the workers in order to determine whether they have achieved the production in comparison with the desired production, setting up labor time and many more.

A major feature of such books includes scheduling the production. Here, the online workbench scheduling is used in order to review the product. Moreover, one can also come to know about the exact time for scheduling. Another use of such books is also that it helps to determine the rate even after using the MRP of the product.

As far as the manufacturing accounting is concerned, one can gain a plenty of knowledge regarding this. One can easily determine the cost of material, labor expenses and other overhead expenditures that are associated with the production of a good. It also helps in comparing the actual cost of an item with that of the estimated cost. Any journal entries that are to be made in the accounting books are also prepared.

Processing as well as the routing instructions is best explained by such books. They help a factory to understand about complex systems such as master and non standard routings. The sequence of the products can also be changed to a considerable extent.

Before purchasing any of the shop floor series books it is important to look for the bis catalogue. Such standards were introduced in the year 1947. These standards are applicable in case of articles, any particular scientific process as well as important amendments. They were developed after a consensus was formed between scientists, manufacturer, Government bodies and regulatory bodies. All the standards are prepared keeping in mind about the set of rules established by the Indian Organizations for Standards.

Source : http://buybooksonline2.wordpress.com/2014/02/06/how-shop-floor-series-books-can-help-you-to-improve-your-work-productivity/

TPM Books are helpful for workers involved in production and manufacturing

Autonomous Maintenance for Operators - There are many techniques and methods that are adapted by an organization in order to achieve the production target in a particular month. One of the methods that are being adapted by the organization is the Total Productive Maintenance. One of the books that helps and individual to have a good knowledge of the subject is Autonomous Maintenance for Operators.

Autonomous Maintenance is a process, where the operator of the machine himself takes care of the equipment. It includes tightening parts of the machine with the and also lubricating them so that they remain in good working condition. Reading books related to this subject will enable the machine operators, team leaders as well as supervisors to know briefly about the job functions and they will have a more clear understanding of their job description.

OEE for Operators: Overall Equipment Effectiveness is another book that deals with the ways and methods of the Total Productive Maintenance. The chapters in the book are mainly concerned with some important topics such as measuring the loss related with the equipments in the factory and minimizing them at the same time. It also gives knowledge to an individual about the different tricks that are to be applied in the shop floor in order to maximize the amount of sales.

Both the books are primarily written to motivate and encourage all the workers employed in the production or the manufacturing unit of a plant. Human resource is one of the biggest assets in an organization. In order to utilize them effectively, it is necessary for the management to take care of them Reading such books can uplift the confidence of the workers and motivate them to work hard. The principles and the theories mentioned can increase the output of an organization if they are applied properly by all the employees in their work.

At Standards Media, you can get a set of 16 shopfloor series books. You can purchase the full package of books online here by paying Rs 11500.

Source: http://buybooksonline2.wordpress.com/2014/01/31/tpm-books-are-helpful-for-workers-involved-in-production-and-manufacturing/

Know the use of mechanics by reading engineering books

Since the evolution of machines, man has inherently lived in the mechanical engineering books. Such books have been the constant source of knowledge for engineers who deal with mechanics. The subjects cover a vast area of study that includes thermodynamics, material science, kinematics and many more. Since, the evolution of the subject in the early 18^th century, in Europe; mechanical engineering has evolved rapidly and had forayed in the modern fields of engineering like robotics, aircraft and modern transport system.

If there is any field, where mechanical engineering has proved its worth, then it is aerospace. Aeronautical or aerospace engineering has helped to construct airplanes and aerospace flights or rockets respectively, which are one of the finest discoveries in the history of mankind. Without reading the engineering books, it would not have been possible for scientists to learn the principles and the complex theories that go behind the working of such immaculate machines. Such books are really interesting to read.

It is due to the engineering books that led to the discovery of steam engine, an important invention that forms an essential part of the Industrial Revolution. Without them, human beings neither could have learnt about vehicles, nor would bridges and highways being constructed.

Reading Kanban Books can be of importance to all the scientists as well as the mechanical engineers. Such books focus on two basic principles; lean and Just in Time. While the Lean inventory system focuses on saving the time of the company by reducing the process of surplus production, Just in Time inventory is mainly concerned with reducing the inventory as well as the carrying costs.

Standards Media is a leading publishing house based in New Delhi. It publishes all kind of books, starting from Auditing, Engineering to Management books. The popularity of this online book store has made it one of the major exporters of books in India.

Source : http://buybooksonlineindia.jimdo.com/2014/01/29/know-the-use-of-mechanics-by-reading-engineering-books/

Read TPM Books and know the basic concepts of the subject

TPM Books are the ultimate way to gain knowledge regarding Total Productivity Maintenance. Before taking forward the conversation about it, it is necessary to understand the meaning of the term. Total Productivity Maintenance is a new system that is introduced in the factories in order to achieve the production target by motivating all its employees.

This system was introduced in order to bring some changes in the manufacturing department of the plant as well as some important benefits such as optimum utilization of the resources in context to any kind of economic environment, production of good without compromising its quality and reduction of defective goods to the maximum. Reading a TPM books help an individual to learn all the basic concepts related to Total Productivity Maintenance.

Most of the people confuse between TPM and TQM Books; there lies a difference between the two. While TPM is mainly concerned with the equipment, TQM on the other hand is concerned with the quality. The purpose of the former is to engage the employees to achieve the target, where as the latter is mainly concerned with organizing the management of an organization properly.  The principles of Total quantity management mainly came in effect in the late 80s and the early 90s.

CRC handbook of chemistry and physics is a book that is written for those students and individuals who are involved in the scientific research of chemistry and physics. Published by the chemical Rubber Company, the book has released a number of editions till date. It has currently released its 94^th edition. It is even preferred by professors in the science colleges to all their students.

Standards Media has been providing books of different subjects online since the year 1992. It sells books of various standards written by well known authors. You can purchase the books online from here and get it delivered to your doorstep within few days of ordering.

Source: http://buybooksonline.edublogs.org/2014/01/28/read-tpm-books-and-know-the-basic-concepts-of-the-subject/

Electrical and metallurgy books are important for Students

Science is one subject that includes a variety of topics and one of them is electrical engineering. Electrical Engineering Books have found their usage since the advent of the subject. It mainly deals with study in the field of electromagnetism and electricity. Man could not have benefited immensely today as it has done, without electricity.

Behind every major electrical invention on this earth, like the theory of electromagnetism or the electro generator by Michael Faraday; electrical engineering books have played a vital role behind all of them. It is only by gaining the necessary knowledge from these books that scientists could discover and invent new things. All colleges and universities that teach electrical engineering advise all their students to go through such books so that a student can have a clear concept about the subject.

Metallurgy Books on the other hand deals with the physical and chemical properties of metals. They explain the theory behind the occurrence of certain metals as well as compounds. This subject is divided in to two sections: ferrous and non ferrous metallurgy. While ferrous metals mainly deal with all the materials that are made from iron, non ferrous metallurgy on the other hand, deals with all other metals except iron. It is mostly the ferrous that is responsible for the maximum production of metal on earth.

You should read ASM Handbook if you really want to have a good knowledge about metals. ASM is the American Society of Metals. They publish a variety of reference books on metals every year. These books are really helpful to the students who study metals and all those professionals who are involved in this field. If you want to purchase an ASM handbook, then you can login to the website of Standards Media and purchase a book online for yourself.

Source: http://scienceandtechnologybooks.weebly.com/1/post/2014/01/electrical-and-metallurgy-books-are-important-for-students.html